203

ZLFL连续式沸腾制粒机

2019-5-21

ZLFL连续式沸腾制粒机

  ZLFL连续式沸腾制粒机

  热风进入流化床底部使物料呈流化状。粘结剂由泵送到雾化喷嘴,雾化后涂布于流化颗粒表面或使颗粒相互粘结,经不断地流化、涂布、干燥,颗粒逐渐长大,达到所要求的粒度后从流化床出料口排出。流化、雾化产生的细粉,由旋风分离器回收后,重新加入到喷雾造粒流化床中,成为新颗粒的核心,实现流化床内颗粒数的平衡。喷雾、造粒、干燥在同一设备中完成。

  ZLFL Continuous boiling granulator

  The hot air enters the bottom of the fluidized bed so that the material is fluidized.Binder is pumped into the atomizing nozzle,atomization and then coated on the surface of the fluidized particles or particles are bonded to each other,by continuous flow,coating and drying,the particles grow up,to achieve the required size is discharged from the outlet of the fluidized bed.The fine powder produced by fluidization and atomization is recovered by cyclone separator and then added to spray granulation fluidized bed to become the core of new particle and realize the balance of particle number in fluidized bed.Spraying,granulation and drying are completed in the same equipment.